Toyota Tundra 2005 Service - Repair - Maintenance page 3023

BE-1 14
N05998
e-10-2
3
4
BODY ELECTRICAL -
INSPECTION
1. INSPECT POWER WINDOW MASTER SWITCH
CONTINUITY
Driver's switch:
Switch Position
UP
OFF
DOWN (AUTO)
Passenger 's switch (Window unlock):
Switch Position
UP
OFF
DOWN
Passenger 's switch (Window lock):
Switch Position
UP
No Pin
OFF
I10567
DOWN
If the continuity is not as specified, replace the switch.
2. Using an ammeter:
INSPECT ONE-TOUCH POWER WINDOW SYSTEM/
CURRENT OF CIRCUIT
(a) Disconnect the connector from the master switch.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 3 on the wire harness side connector and the negative
(-) lead to the negative (-) terminal of the battery.
(c) Connect the positive (+) lead from the battery to terminal
4 on the wire harness side connector.
I03132
(d) When the window moves down, check that the current is
approximately 7 A.
POWER WINDOW CONTROL SYSTEM (Except
Double Cab)
Tester Connection
1 - 4, 3 - 9
1 - 3 - 4
1- 3, 4 - 9
Tester Connection
1 - 10, 8 - 9
1 - 8 - 10
1 - 8, 9 - 10
Tester Connection
8 - 9
8 - 10
9 - 10
Author :
BE2LH-01
Specified Condition
Continuity
Continuity
Continuity
Specified Condition
Continuity
Continuity
Continuity
Specified Condition
Continuity
Continuity
Continuity
Date :
4671