Toyota Tundra 2005 Service - Repair - Maintenance page 3141

BODY - FRONT DOOR (Double Cab)
REASSEMBLY
1. INSTALL FRONT DOOR WEATHERSTRIP NO. 2
2. INSTALL FRONT DOOR WEATHERSTRIP
3. INSTALL FRONT DOOR OUTSIDE HANDLE WITH
LOCK CYLINDER
(a) Install the lock cylinder to the front door outside handle
with the bolt.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
(b) Install the front door outside handle with lock cylinder with
the 2 bolts.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
(c) Install the service hole plug.
4. INSTALL FRONT DOOR LOCK
HINT:
Apply MP grease to the sliding and rotating parts of the front
door lock.
(a) Install the front door lock cover to the front door lock with
the 2 screws.
H16655
(b) Using a torx® socket wrench, install the front door lock
with the 3 torx® screws.
Torx® socket wrench:
T30 (Part No. 09042-00010 or locally manufactured
tool)
Torque:
5.0 N·m (51 kgf·cm, 44 in.·lbf) for bolt
5.0 N·m (51 kgf·cm, 44 in.·lbf) for screw
HINT:
H16654
Apply adhesive to the 3 screws.
Adhesive: Part No. 08833-00070, THREE BOND 1324
or equivalent.
(c) Connect the connector and tighten the bolt.
(d) Connect the 2 control links to the front door outside han-
dle and front door lock cylinder.
(e) Install the front door lock control link protector with the
screw.
(f) Install the clamp.
(g) Connect the 2 control cables to the clamp.
Author : Date :
BO-27
BO4PT-03
4798