Toyota Tundra 2005 Service - Repair - Maintenance page 3321

Front
BODY
REASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page
1. INSTALL SEATBACK COVER
(a) Install the seatback cover with new hog rings.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H11248
(b) Install the new hog rings to the rear side of the seatback
assembly.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H11247
2. INSTALL HEADREST SUPPORTS
LH Headrest
HINT:
Support
Ensure that the button of the 3 LH headrest supports is installed
to the left.
H24388
3. INSTALL CENTER ARMREST HINGE
(a) Install the center armrest hinge with the 2 bolts.
Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)
H11246
- REAR SEAT (Bench Type)
SS-2 ).
Author :
BO-207
BO2G1-05
Date :
4978