SUSPENSION AND AXLE
REMOVAL
1.
REMOVE FRONT WHEEL
2.
DISCONNECT SHOCK ABSORBER FROM LOWER
Vinyl Tape
SUSPENSION ARM
(a)
Remove the shock absorber lower side set nut and wash-
er.
NOTICE:
Do not remove the bolt.
(b)
Wrap the bolt's head with vinyl tape to prevent the drive
shaft boot from being damaged.
(c)
Pry down the lower suspension arm to remove the bolt
F07274
and disconnect the shock absorber.
3.
REMOVE SHOCK ABSORBER WITH COIL SPRING
Remove the 3 nuts and shock absorber with the coil spring.
R12773
−
FRONT SHOCK ABSORBER
SA−63
SA0A0−05