Toyota Tundra 2005 Service - Repair - Maintenance page 2828

SUPPLEMENTAL RESTRAINT SYSTEM
H24316
H24315
H24314
H24313
- SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
2. INSTALL ARMREST ASSEMBLY
(a) Install the spacer to the armrest assembly.
(b) Install the armrest assembly, armrest lock plate and arm-
rest spacer with the bolt.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
HINT:
(c) Install the armrest cap to the armrest assembly.
3. INSTALL POWER SWITCH
Install the power switch with the 3 screws.
4. INSTALL LUMBAR SWITCH
Install the lumbar switch with the 2 screws to the seat cushion
outer shield.
5. INSTALL FRONT SEAT INNER BELT
(a) Install the front seat inner belt with the nut.
Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)
(b) Connect the connectors and wire harness clamps.
6. INSTALL SEAT CUSHION LOWER SHIELD, SEAT
CUSHION OUTER SHIELD AND SEAT CUSHION IN-
NER SHIELD
(a) Assemble the seat cushion lower shield and seat cushion
outer shield with the screw.
(b) Perform the same procedure as for the other side.
(c) Connect the lumbar switch connector to the lumbar
switch, and install the seat cushion lower shield, outer
shield and inner shield.
(d) Install the 2 screws to the seat cushion lower shield.
(e) Install the 2 screws to the seat cushion inner shield.
(f) Install the 2 screws to the seat cushion outer shield.
Author :
RS-61
Date :
4476