Toyota Tundra 2005 Service - Repair - Maintenance page 3002

OFF
2 1
ON
ON
OFF
ON
OFF
ON
OFF
BODY ELECTRICAL - COMBINATION METER
17. INSPECT BRAKE FLUID LEVEL WARNING SWITCH
CONTINUITY
(a) Remove the reservoir tank cap and strainer.
(b) Disconnect the connector.
(c) Check that no continuity exists between the terminals with
the switch OFF (float).
(d) Use siphon to take fluid out of the reservoir tank.
(e) Check that continuity exists between the terminals with
the switch ON (sink).
I19428
If the continuity is not as specified, replace the switch.
(f) Pour the fluid back in the reservoir tank.
18. Double cab:
INSPECT PARKING BRAKE SWITCH CONTINUITY
(a) Check that there is continuity between the terminal and
switch body with the switch ON (switch pin released).
(b) Check that there is no continuity between the terminals
with the switch OFF (switch pin pushed in).
If the continuity is not as specified, replace the switch.
I27486
19. Except double cab (A/T):
INSPECT PARKING BRAKE SWITCH CONTINUITY
(a) Check that there is continuity between the terminal and
switch body with the switch ON (switch pin released).
(b) Check that there is no continuity between the terminals
with the switch OFF (switch pin pushed in).
If the continuity is not as specified, replace the switch.
N01212
20. Except double cab (M/T):
INSPECT PARKING BRAKE SWITCH CONTINUITY
(a) Check that there is continuity between the terminals with
the switch ON (switch pin released).
(b) Check that there is no continuity between the terminals
with the switch OFF (switch pin pushed in).
If the continuity is not as specified, replace the switch.
I27487
Author : Date :
BE-93
4650