Toyota Tundra 2005 Service - Repair - Maintenance page 2983

BE-74
1
BODY ELECTRICAL
INSPECTION
1.
(a)
(b)
(c)
If the continuity is not as specified, replace the panel.
9
I27422
2.
Using an ohmmeter, check that continuity exists between termi-
nals 3 and 2.
If the continuity is not as specified, replace the bulb or the stop
light assembly.
I11922
- CARGO LIGHT SYSTEM (Except Double Cab)
INSPECT CARGO LIGHT SWITCH CONTINUITY
Remove the integration control panel.
Check that continuity exists between terminals 9 and 1
with the switch ON.
Check that no continuity exists between terminals 9 and
1 with the switch OFF.
INSPECT CARGO LIGHT ASSEMBLY CONTINUITY
Author :
BE2L4-01
Date :
4631