Toyota Tundra 2005 Service - Repair - Maintenance page 3319

BODY -
6. REMOVE LH SEAT CUSHION HINGE COVER
Using a screwdriver, remove the LH seat cushion hinge cover.
HINT:
Tape the screwdriver tip before use.
H11240
7. REMOVE RH SEAT CUSHION HINGE UPPER AND
LOWER COVERS
Using a screwdriver, remove the RH seat cushion hinge upper
and lower covers.
HINT:
Tape the screwdriver tip before use.
H11241
8. REMOVE SEAT CUSHION COVER
Hog Ring
(a) Open the fastener.
(b) Remove the hog rings and seat cushion cover.
(c) Perform the same procedure on the other side.
H11242
9. REMOVE SEAT CUSHION SIDE COVER
Remove the screw and seat cushion side cover.
10. REMOVE SEAT CUSHION HINGE PLATE
Remove the 2 nuts and seat cushion hinge plate from the seat-
back frame.
11. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
12. REMOVE 4 CRS TETHER ANCHOR BRACKETS
(a) Remove the bolt and CRS tether anchor bracket.
H11243
(b) Perform the same procedure on the other CRS tether an-
chors.
REAR SEAT (Bench Type)
Author :
BO-205
Date :
4976