Toyota Tundra 2005 Service - Repair - Maintenance page 2826

SUPPLEMENTAL RESTRAINT SYSTEM
REPLACEMENT
REPLACEMENT REQUIREMENTS
In the following cases, replace the seat frame assembly or seatback cover with a new one.
The side airbag has been deployed.
The side airbag assembly has been found to be faulty in troubleshooting.
The side airbag assembly has been found to have cuts while checking items
(see page RS-52 ).
The seatback cover has been found to have cuts and frayed seams while
checking items
(see page RS-52 ).
The side airbag assembly has been found to be faulty while checking items
(see page RS-52 ).
The seatback cover has been found to be faulty while checking items
(see page RS-52 ).
The seatback assembly has been dropped.
CAUTION:
For removal and installation of the seat frame assembly, see page
low the correct procedure.
Case
- SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
Seat assembly
Seat frame assembly
Seat frame assembly
Seatback cover
Seat frame assembly
Seatback cover
Seat frame assembly
RS-49
Author :
Replacing part
and RS-60 . Be sure to fol-
Date :
RS-59
RS12A-01
4474