Toyota Tundra 2005 Service - Repair - Maintenance page 3199

(a)
BODY -
REMOVAL
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page
1. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE REAR SEAT (See page
2. Double cab:
FOLD REAR SEAT
(b)
(a) Lower the headrest to the lowest position. Pull the seat-
back angle adjusting lever and fold the seatback down.
(b) Unlock the seat legs by pulling up one of the lever on the
seat legs and turn up the whole seat forward.
3. Standard cab:
REMOVE FRONT DOOR SCUFF PLATES
(see page
H23147
4. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE ACCESS DOOR SCUFF PLATES
(See page
5. Double cab:
REMOVE BACK PANEL TRIM (See page
6. REMOVE ASSIST GRIPS
(See page
7. Standard cab:
REMOVE FRONT PILLAR GARNISHES
(See page
8. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE ROOF SIDE RAIL GARNISHES
(See page
9. REMOVE ROOM LIGHT (See page
10. Standard cab:
REMOVE COAT HOOK (See page
11. Standard cab:
REMOVE BACK PANEL UPPER GARNISH
(See page
12. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE QUARTER TRIMS (See page
13. Double cab:
REMOVE QUARTER TRIMS LOWER
(See page
14. Double cab:
REMOVE QUARTER TRIMS UPPER
(See page
BACK WINDOW GLASS
SS-2 ).
BO-126 )
BO-126 )
BO-126 , BO-133
BO-126 )
BO-126 )
BO-126 )
BO-133 )
BO-133 )
Author :
BO-85
BO4Q5-01
BO-203 )
BO-133
)
BO-126 , BO-133
BO-126 )
BO-126 )
Date :
4856
)
)