BE-72
3
10
BODY ELECTRICAL
-
CARGO LIGHT SYSTEM (Double Cab)
INSPECTION
1.
INSPECT CARGO LIGHT SWITCH CONTINUITY
(a)
Remove the integration control panel.
(b)
Check that continuity exists between terminals 3 and 10
with the switch ON.
(c)
Check that no continuity exists between terminals 3 and
10 with the switch OFF.
If the continuity is not as specified, replace the panel.
I27502
2.
INSPECT CARGO LIGHT ASSEMBLY CONTINUITY
Using an ohmmeter, check that continuity exists between termi-
nals 3 and 2.
If the continuity is not as specified, replace the bulb or the stop
light assembly.
I11922
Author :
Date :
BE2L2-01
4629