Toyota Tundra 2005 Service - Repair - Maintenance page 3210

BO-96
BODY - BACK WINDOW GLASS
(c) Install the 12 bolts.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
H22882
16. Power slide type:
INSTALL BACK WINDOW REGULATOR ASSEMBLY
(a) Install the back window regulator assembly with the 7
nuts.
Torque: 5.5 N·m (54 kgf·cm, 49 in.·lbf)
(b) Install the back door glass channel cover.
H20705
(c) Install the 4 clips and 2 back panel silencer pads.
(d) Install the tether anchor brackets with the 2 bolts.
Torque: 20 N·m (200 kgf·cm, 15 ft·lbf)
17. Standard cab:
Access cab (Standard body type):
Access cab (Wide body type):
INSTALL REAR PART OF ROOF HEADLINING
(a) Standard cab:
Install the rear part of the roof headlining with the 2 clips.
H20704
(b) Access cab:
Install the rear part of the roof headlining with the 3 clips.
18. Double cab:
INSTALL QUARTER TRIMS UPPER
(See page
19. Double cab:
INSTALL QUARTER TRIMS LOWER
(See page
20. INSTALL QUARTER TRIMS (See page
BO-138
21. Standard cab:
INSTALL BACK PANEL UPPER GARNISH
(See page
22. Standard cab:
INSTALL COAT HOOK (See page
23. INSTALL ROOM LIGHT (See page
24. Access cab (Standard body type):
Access cab (Wide body type):
INSTALL ROOF SIDE RAIL GARNISHES
(See page
BO-138 )
BO-138 )
)
BO-130 )
BO-130 , BO-138
Author :
BO-
BO-130 )
BO-130 , BO-138
)
Date :
130,
)
4867