SST
SST
SST
SUSPENSION AND AXLE
Total preload (at starting):
Drive pinion preload plus
0.4 − 0.6 N·m (4 − 6 kgf·cm, 3.5 − 5.2 in.·lbf)
If necessary, disassemble and inspect the differential.
7.
REMOVE COMPANION FLANGE
(a)
Using a chisel and a hammer, unstake the nut.
(b)
Using SST to hold the flange, remove the nut.
SST
SST
SA2349
(c)
Using SST, remove the companion flange.
SST
R11391
8.
REMOVE FRONT OIL SEAL
Using SST, remove the oil seal from the differential carrier.
SST
Z00686
9.
REMOVE FRONT BEARING AND BEARING SPACER
(a)
Using SST, remove the bearing from the drive pinion.
SST
If the front bearing is damaged or worn, replace the front bear-
ing.
(b)
Remove the 2 washers and bearing spacer.
Z00641
−
REAR DIFFERENTIAL CARRIER (w/ LSD)
09330−00021
09950−30012 (09951−03010, 09953−03010,
09954−03010, 09955−03030, 09956−03030)
09308−10010
09556−22010
SA−127