Toyota Tundra 2005 Service - Repair - Maintenance page 2357

TR−8
TRANSFER − TRANSFER ASSEMBLY
9. SEPARATE FRONT CASE AND REAR CASE
(a) Remove the 12 bolts and 2 clamps.
(b) Using a plastic hammer, tap on the front case and rear
case, and separate them.
F19348
10. REMOVE SHIFT FORK SHAFT
(a) Using a hexagon wrench (6 mm), remove the 2 straight
screw plugs, springs and balls from the front drive and
high and low shift forks.
F07965
(b) Using 2 screwdrivers and a hammer, tap out the 2 snap
rings from the shift fork shaft.
F07972
(c) Remove the bolt and shift fork shaft stopper.
F07966