PR−10
Matchmarks
Matchmarks
PROPELLER SHAFT
REMOVAL
1.
(a)
(b)
(c)
Z15303
(d)
(e)
(f)
2.
(a)
(b)
Matchmarks
(c)
Q07228
(d)
(e)
(f)
(g)
Z15304
−
PROPELLER SHAFT ASSEMBLY (4WD)
REMOVE FRONT PROPELLER SHAFT
Place matchmarks on the differential and propeller shaft
flange.
Remove the 4 bolts, washers and nuts, and disconnect
the propeller shaft from the differential.
Use a rope to suspend the front edge of the propeller
shaft.
Place matchmarks on the transfer and propeller shaft
flanges.
Remove the 4 nuts and washers.
Remove the propeller shaft from the transfer flange.
REMOVE REAR PROPELLER SHAFT
Place matchmarks on the transfer and propeller shaft
flanges.
Remove the 4 nuts and washers, and disconnect the pro-
peller shaft from the transfer flange.
Use a rope to suspend the front edge of the propeller
shaft.
Remove the 2 mounting bolts and center support bearing.
Place matchmarks on the differential and propeller shaft
flanges.
Remove the 4 bolts, washers and nuts.
Remove the propeller shaft from the differential.
PR05N−05