Toyota Tundra 2005 Service - Repair - Maintenance page 2810

SUPPLEMENTAL RESTRAINT SYSTEM
Front Passenger
Airbag Assembly
Battery
SST
10 m (33 ft) or more
(d) Place the tires.
(1)
Tires
(2 or more)
(2)
Tires
(2 or more)
H24665
(3)
CAUTION:
Make sure that the wire harness is tight. Looseness in the
wire harness results in the tires coming free due to the
shock when the airbag is deployed.
H23917
(e) Install the SST.
Connect the SST connector.
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
(f) Deploy the airbag.
(1)
H24672
(2)
(3)
CAUTION:
When deploying the airbag, make sure that no one is near
the tire.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.
- FRONT PASSENGER AIRBAG ASSEMBLY
Place at least 2 tires under the tire which the front
passenger airbag assembly is tied to.
Place at least 2 tires over the tire which the front
passenger airbag assembly is tied to. The top tire
should have the disc wheel installed.
Tie the tires together with 2 wire harness.
09082-00700, 09082-00780
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
battery negative (-) terminal.
Check that no one is within a 10 m (33 ft) radius of
the tire which the front passenger airbag assembly
is tied to.
Press the SST activation switch and deploy the air-
bag.
Author :
RS-43
Date :
4458