Toyota Tundra 2005 Service - Repair - Maintenance page 3040

Tester Connection
1N-5 - Body ground
1N-5 - Body ground
1N-6 - Body ground
1N-6 - Body ground
1N-9 - Body ground
1N-9 - Body ground
1N-10 - Body ground
1N-10 - Body ground
1N-19 - Body ground
1N-19 - Body ground
1N-20 - Body ground
1N-20 - Body ground
1N-21 - Body ground
1N-21 - Body ground
1N-22 - Body ground
1N-22 - Body ground
1N-23 - Body ground
1N-23 - Body ground
1N-24 - Body ground
Tester Connection
1H-8 - Body ground
1H-9 - Body ground
BODY ELECTRICAL -
Condition
Cargo light switch OFF
Cargo light switch ON
Key unlock warning switch OFF
(Ignition key removed)
Key unlock warning switch ON
(Ignition key inserted)
Driver's door unlock detection switch OFF
Driver's door unlock detection switch ON
Passenger's door unlock detection switch OFF
Passenger's door unlock detection switch ON
Door lock manual switch and door lock control
switch LOCK
Door lock manual switch and door lock control
switch OFF or UNLOCK
Door key lock and unlock switch LOCK
Door key lock and unlock switch OFF or UN-
LOCK
Door lock manual switch or door lock control
switch UNLOCK
Door lock manual switch and door lock control
switch OFF or LOCK
Front passenger's door key lock and unlock
switch UNLOCK
Front passenger's door key lock and unlock
switch LOCK or OFF
Driver's door key lock and unlock switch UN-
LOCK
Driver's door key lock and unlock switch LOCK
or OFF
Constant
If the result is not as specified, there may be a malfunction on
the wire harness side.
(b) Reconnect the 1H, 1I, 1J, 1K and 1N driver side J/B con-
nectors, and check the voltage of each terminal of the
connectors.
Condition
Door lock manual switch LOCK or UNLOCK
Door lock manual switch LOCK or UNLOCK
If the result is not as specified, the integration relay (driver side
J/B) may malfunction.
POWER DOOR LOCK CONTROL SYSTEM (Except
Double Cab)
Author :
Specified Condition
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
Continuity
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
Specified Condition
0 V 10 - 14 V Below 1 V
0 V 10 - 14 V Below 1 V
Date :
BE-131
4688