Toyota Tundra 2005 Service - Repair - Maintenance page 3303

Claw
Hog Ring
Hog Ring
BODY - FRONT SEAT (Split Type: Passenger's Side)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
Tape the screwdriver tip before using it to remove parts.
1. REMOVE SEAT LEG INNER COVER
Remove the 3 screws and seat leg inner cover.
2. REMOVE HEADRESTS
3. REMOVE RECLINING ADJUSTER RELEASE HANDLE
Using a screwdriver, remove the reclining adjuster release han-
dle.
HINT:
Tape the screwdriver tip before use.
H24353
4. REMOVE RH SEAT CUSHION SHIELD
Disengage the claws and remove the RH seat cushion shield.
5. REMOVE SEAT CUSHION LOWER SHIELD
Remove the 2 screws and seat cushion lower shield.
H24352
6. REMOVE SEATBACK ASSEMBLY
(a) Remove the hog rings from the seatback cover belt.
H24354
(b) Remove the hog rings from the seatback cover.
(c) Open the fastener.
(d) Remove the bolt and center armrest assembly.
(e) Remove the 2 bushings.
H24355
Author : Date :
BO-189
BO4SY-02
4960