Toyota Tundra 2005 Service - Repair - Maintenance page 2460

SA−46
Socket Wrench
SST
SUSPENSION AND AXLE
REPLACEMENT
SST
1.
(a)
R04465
(b)
SST
R04348
2.
(a)
Z03857
(b)
R13199
(c)
(d)
R13422
− FRONT DIFFERENTIAL CARRIER
REPLACE COMPANION FLANGE DUST DEFLECTOR,
IF NECESSARY
Using SST, a socket wrench and a press, remove the dust
deflector.
SST 09950−00020
Using SST and a press, install a new dust deflector.
SST 09636−20010
REPLACE INTERMEDIATE SHAFT NO. 2, IF NEC-
ESSARY
Remove the clutch hub.
(1) Using a snap ring expander, remove the snap ring.
(2) Remove the clutch hub from the intermediate shaft
No. 2.
Remove the oil seal.
Using SST, remove the oil seal from the tube.
SST 09308−00010
Remove the intermediate shaft No. 2 from the tube.
(1) Using needle nose pliers, remove the snap ring.
(2) Remove the shaft from the tube.
Remove the intermediate shaft No. 2 bearing.
(1) Using a snap ring expander, remove the snap ring.
SA1K4−02