Toyota Tundra 2005 Service - Repair - Maintenance page 3216

BO-102
BODY - SLIDING ROOF
HINT:
At the time of reassembly, please refer to the following items.
z
Adjust the drive cable to a closed and tilted down position.
z
Slide the cable forward or backward to align the 2 marks
as shown in the illustration.
z
Slide the cable to the forefront with your hand.
8. REMOVE ROOF WIND DEFLECTOR PANEL
H12171
9. REMOVE GUIDE BLOCK
(a) Remove the 2 screws and guide block.
(b) Perform the same procedure on the other side.
H10516
10. REMOVE SLIDING ROOF HOUSING
Remove the 6 screws and sliding roof housing.
N21522
11. REMOVE CABLE GUIDE CASING
Remove the 2 screws and cable guide casing.
H11049
Author : Date :
4873