Toyota Tundra 2005 Service - Repair - Maintenance page 3082

Hide thumbs Also See for Tundra 2005:
Table of Contents

Advertisement

BE-182
BODY ELECTRICAL
-
WIRELESS DOOR LOCK CONTROL SYSTEM (Except
Double Cab)
REPLACEMENT
1.
REMOVE TRANSMITTER BATTERY
NOTICE:
Special caution should be taken for handling each compo-
nent as they are precision electronic components.
(a)
Using a screwdriver, open the transmitter case.
NOTICE:
Do not forcibly pry out the cover.
(b)
Remove the battery (lithium battery).
NOTICE:
D
Do not push the terminals with your finger.
D
Prying up the batteries (lithium battery) to forcibly re-
move it will cause deformation of the terminals.
D
Do not touch the battery with wet hands. Water may
I24758
cause unexpected rust.
D
Do not touch or move any components inside the
transmitter as it may interfere with proper operation.
2.
INSTALL TRANSMITTER BATTERY
(a)
Install a new battery (lithium battery) with the positive (+)
side up, as shown in the illustration.
NOTICE:
D
Be sure that the positive side and the negative side of
the transmitter battery are matched-up correctly.
D
Be careful not to bend the electrode of the transmitter
battery insertion.
D
Be careful that dust or oil does not adhere to the trans-
I24761
mitter case.
(b)
Check that the rubber cover is not distorted or slipped off,
and install the cover.
NOTICE:
Any damage might cause faulty contact of battery (lithium
battery) and terminals.
Author :
Date :
BE2KV-01
4739

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tundra 2006

Table of Contents