Downloading System Software - Canon ImageRunner iR8500 Series Service Manual

18.4 Downloading System Software

18.4.1 Downloading System
18.4.1.1 Downloading Procedure
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Select a model to be connected, and click [CONNECT].
MEMO:
Model name can be confirmed on the Counter Confirmation screen of the machine. Select the model displayed in the brackets on the screen.
2) Click [Download System Software].
3) Select a version to be downloaded, and click [Start].
4) Click [OK] after downloading is completed.
5) Download all required system software programs, and turn OFF and back ON the main power.
6) The control panel screen shows the upgrade status, and will be switched to the screen inducing you to turn OFF and ON the power. Then, turn OFF and
back ON the main power of the machine.
Never turn OFF the power of the machine while the following screen is displayed on the control panel. If the power is turned OFF at this time, writing to
the HDD is interrupted, and the machine fails to start up as a result.
F-18-21
<<<<< download shell >>>>> <<<<< do wnload shell >>>>>
[ SYSTEM JPja-m ] - - - - [ SYSTEM JPja-m ] - - - -
Upgrading complete Upg
[ SYSTEM ZZ ] - - - - - - - [ SYSTEM ZZ ] - - - - - - - Upgrading complete Upg
[ SYSTEM JPja-w ] - - - - [ SYSTEM JPja-w ] - - - - Upg Upgrading complete
[ SYSTEM ZZ ] - - - - - - - [ SYSTEM ZZ ] - - - - - - -
Upgrading complete Upg
[ FONT F ] - - - - - - - - - - [ FONT F ] - - - - - - - - - -
Upgrading complete Upg
[ FONT G ] - - - - - - - - - - [ FONT G ] - - - - - - - - - -
Upgrading complete Upg
+++ Switch OFF the po +++ Switch OFF the power then ON. er then ON. +++
F-18-22
ading complete
ading complete
ading complete
ading complete
ading complete
ading complete
+++
Chapter 18
0008-9115
18-13