Ip Address Dhcp Vendor-Class-Identifier - Dell Z9500 Command Reference Manual

Parameters
remote-id
hostname
remote-id
remote-id
remote-id mac
Default Option 82 uses the chassis MAC address as the remote ID.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
Usage You can enter the ip address dhcp relay information-option and ip
Information address dhcp relay vendor-class-identfier commands in the same ip
address dhcp command line; for example:
ip address dhcp vendor-class-identifier dell9500 relay
information-option mac
ip address dhcp relay information-option mac vendor-class-
identifier dell9500
Related ip address dhcp
Commands configured DHCP server.

ip address dhcp vendor-class-identifier

Include the vendor-class identifier option (option 60) in DHCP packets sent by the client.
Z9500
Syntax
ip address dhcp vendor-class-identifier text
Parameters
vendor-class-
identifier text
Default None.
Command CONFIGURATION
Modes
Dynamic Host Configuration Protocol (DHCP)
Set the hostname as the remote ID in Option 82.
Enter the name to be used as the remote ID in Option 82;
maximum: 64 characters.
Use the chassis MAC address as the remote ID in Option 82.
Description
Introduced on the Z9500.
— configures an interface to receive its IP address from the
Include a user-configurable text string with the hardware-
related information (option 60) in DHCP packets sent by the
client (32 characters maximum).
713