Domain-Name - Dell Z9500 Command Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0

domain-name

Assign a domain to clients based on the address pool.
Z9500
Syntax
domain-name name
Parameters
name
Defaults none
Command DHCP <POOL>
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
Z9500
Syntax
excluded-address [address | low-address high-address]
Dynamic Host Configuration Protocol (DHCP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Give a name to the group of addresses in a pool.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
709