Default-Router - Dell Z9500 Command Reference Manual

Jan 7 01:42:34: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPACK packet in InterfaceFo 2/0
with Lease-IP:100.1.1.253, Mask:255.255.255.0, Server-Id:
100.1.1.2
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPOFFER packet in Interface Fo
2/0 with Lease-Ip:100.1.1.253, Mask:255.255.255.0,Server-Id:
100.1.1.2
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:

default-router

Assign a default gateway to clients based on the address pool.
Z9500
Syntax
default-router address [address2...address8]
Parameters
address
Defaults none
Command DHCP <POOL>
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Dynamic Host Configuration Protocol (DHCP)
Last logging buffer cleared: Jan 7 01:41:17
DHCP RELEASE sent in Interface Fo 2/0
DHCP REQUEST sent in Interface Fo 2/0
DHCP DISCOVER sent in Interface Fo 2/0
Enter a list of routers that may be the default gateway for
clients on the subnet. You may specify up to eight routers.
List them in order of preference.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
707