Lease - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
Usage
Use this command to include the vendor-class identifier (option 60) in DHCP
Information
packets sent by the client. This option is used by DHCP clients to identify the
vendor type and configuration of a DHCP client. The vendor-class identifier
includes hardware-related information that identifies the switch and includes a
user-configurable text string .
You can enter the ip address dhcp relay information-option and ip
address dhcp relay vendor-class-identfier commands in the same ip
address dhcp command line; for example:
ip address dhcp vendor-class-identifier dell9500 relay
information-option mac
ip address dhcp relay information-option mac vendor-class-
identifier dell9500
Related ip address dhcp
Commands configured DHCP server.

lease

Specify a lease time for the addresses in a pool.
Z9500
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days
hours
minutes
infinite
Defaults 24 hours
Command DHCP <POOL>
Modes
714
Description
Introduced on the Z9500.
— configures an interface to receive its IP address from the
Enter the number of days of the lease. The range is from 0 to
31.
Enter the number of hours of the lease. The range is from 0
to 23.
Enter the number of minutes of the lease. The range is from
0 to 59.
Specify that the lease never expires.
Dynamic Host Configuration Protocol (DHCP)