debug ip dhcp client packets
Activate the debugging and display of log messages for DHCP packets sent and received on DHCP client
interfaces.
Z9500
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface
typeslot/port
Defaults
none
Command
EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# debug ip dhcp client packets
Dell(conf)#do show debugging
Dhcp Client :
DhcpClient Packet debugging is on for fortyGigE 2/0
Dell(conf-if-fo-2/0)#ip address dhcp
Dell(conf-if-fo-2/0)#no ip address dhcp
Dell(conf-if-fo-2/0)#do show logging
Syslog logging: enabled
(40960 bytes)
706
Enter the keyword interface with the interface type and
slot/port information to display DHCP log messages for a
specified interface. The valid interface types are:
•
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 5 Messages Logged, Size
Trap logging: level informational
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Logging to 172.16.1.162
Dynamic Host Configuration Protocol (DHCP)