Show Hardware Buffer Interface - Dell Z9500 Command Reference Manual

RX - PFC Frame Priority 4
RX - PFC Frame Priority 5
RX - PFC Frame Priority 6
RX - PFC Frame Priority 7
RX - Debug Counter 0
RX - Debug Counter 1
RX - Debug Counter 2
<output truncated for brevity>

show hardware buffer interface

Display buffer statistics for a specific interface.
Syntax
show hardware buffer inteface interface{priority-group { id |
all } | queue { id| all} ] buffer-info
Parameters
interface
interface
priority-group
queue
buffer-info
Command
EXEC
Modes
EXEC Privilege
Command
Version
History
9.8(0.0)
Example
Dell# show hardware buffer interface tengigabitethernet 1/1
displaying
buffer-info
-----
total-buffer
Maximum Shared Limit for the Interface: 38336
information for
Default Packet Buffer allocate for the Interface: 120
the interface
Used Packet Buffer for the Interface: 0
684
Enter any of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter the keyword priority-group followed by id for
specific priority-group or keyword all.
Enter the keyword queue followed by id for specific queue or
keyword all.
To display total buffer information for the interface, enter the
keywords buffer-info.
Description
Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500.
Buffer Stats for Interface Te 1/1 -----
0
0
0
0
0
0
0
Debugging and Diagnostics