Clear Hardware System-Flow - Dell Z9500 Command Reference Manual

Version
8.3.7.0
7.8.1.0
Related show hardware
Commands statistics of the designated component of the designated stack member.

clear hardware system-flow

Clear system-flow statistics from a specified line card.
Z9500
Syntax
clear hardware system-flow layer2 linecard slot-id port-set
port-pipe counters
Parameters
linecard slot-id
port-set port-
pipe counters
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.0
8.3.7.0
7.8.1.0
Related show hardware
Commands statistics for a specified hardware component.
Debugging and Diagnostics
Description
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input and output
Enter the linecard slot-id parameters to identify the
Z9500 line card on which you want to clear system-flow
statistics. The range of slot IDs is from 0 to 2.
Enter the keywords port-set along with a port-pipe
number, then the keyword counters to clear the system-flow
counters on the selected port-pipe. The range of port-pipe
numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1
and 2.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input and output
665