Show Hardware Counters Interface - Dell Z9500 Command Reference Manual

Example
Dell#show hardware linecard 0 bp-link-state
(Linecard:
Total valid Links
Backplane-link
Status)
Valid Link bmp
0xfc0003f0-000fc000-3f0000fc-0003f000-00380000
Valid Link bmp State
0xf40003f0-000fc000-3d0000fc-0003f000-00380000
Example
Dell#show hardware linecard 0 hg-stats unit 1 port 50
(Linecard Unit
Higig Port Statistics:
HiGigabitEthernet 0/1/50,
Port: HiGig Port
Input Statistics:
Statistics)
byte pkts
Output Statistics:
byte pkts
19141612676317184 wredDrops
Rate info (interval 15 seconds):
line-rate
line-rate
Related
clear hardware system-flow
Commands
components.
show system
member.

show hardware counters interface

Display the counter information for a specific interface.
Syntax
show hardware counters interface interface
Parameters
counters
interface
interface
682
- 39
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets, 0 bytes 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts 0 Unicasts
0 throttles, 0 discarded, 5208131494077267968 collisions
Input 00.00 Mbits/sec,
Output 00.00 Mbits/sec,
— clears the statistics from selected hardware
— displays the current status of all the stack members or a specific
Enter the keywords counters to display counter value for
the specified linecard the port pipe.
Enter any of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
-
-
0 packets/sec, 0.00% of
0 packets/sec, 0.00% of
Debugging and Diagnostics