Show Hardware Buffer-Stats-Snapshot - Dell Z9500 Command Reference Manual

Used Packet Buffer: 0
-----
Maximum Shared Limit: 29514
Default Packet Buffer allocate for the Queue: 8
<output truncated for brevity>

show hardware buffer-stats-snapshot

Displays buffer statistics tracking resource information for a specific interface.
Syntax
show hardware buffer-stats-snapshot resource interface
interface{priority-group { id | all } | queue { ucast{id | all}
{ mcast {id | all} | all}
Parameters
buffer-stats-
snapshot unit
number
interface
interface
queue
priority-group
Command
EXEC
Modes
EXEC Privilege
Command
Version
History
9.8(0.0)
Usage <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/
Information
multicast buffer usage on per-port per-queue basis. For CPU port, counters for
queues 0 to 11 displays and there is no differentiation between unicast and
multicast queues.
686
Buffer Stats for Interface Te 1/1 Queue 11 -----
Display the historical snapshot of buffer statistical values unit
Enter the keyword unit along with a port-pipe number. The
range is from 0 to 0.
Enter any of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Enter the keyword queue after id for specific queue or
keyword all.
Enter the keyword priority-group followed by id for
specific priority-group or keyword all.
Description
Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500.
Debugging and Diagnostics