Status Display; Save The Setting Display; Display The Decimal Point - Delta ASDA-A3 Series User Manual

Test Operation and Panel Display

4.3 Status display

4.3.1 Save the setting display

When you complete the parameter setting, press the SET key to save the parameters. The panel
4
displays the status for one second.
Displayed symbol

4.3.2 Display the decimal point

4-6
Correctly saved the setting value (Saved).
Read-only and write-protected parameter (Read-only).
Entered the wrong password or did not enter a password (Locked).
Entered an incorrect setting value or the reserved setting value (Out of Range).
You cannot enter a value when in the Servo On state (Servo On).
Changes to the parameter take effect after cycling the power to the servo drive
(Power On).
Displayed symbol
No
function
Description
Description
High byte / low byte indication: this indicates the current high
byte or low byte when the data is displayed in decimal format
(32 bits).
Negative sign: the two decimal points on the left represent the
negative sign when the data is displayed in decimal format (16
or 32 bits). In hexadecimal format, it only shows positive values.
ASDA-A3