Delta ASDA-A3 Series User Manual page 497

Parameters
P5.033
Default:
Unit:
8
Format:
Settings:
Refer to P5.020 for the acceleration / deceleration time in PR mode.
P5.034
Default:
Unit:
Format:
Settings:
This parameter is for the deceleration time for auto protection, and the default value of this is small
(shorter deceleration time).
P5.035
Default:
Unit:
Format:
Settings:
This parameter is for the deceleration time for auto protection, and the default value of this is small
(shorter deceleration time).
P5.036
Default:
Unit:
Format:
Settings:
The first data Capture obtained is saved at this address in the data array. This parameter is only writable
when Capture stops (refer to P5.039).
P5.037■
Default:
Unit:
Format:
8-124
Acceleration / deceleration time (Number #13)
8000
ms
DEC
Acceleration / deceleration time (Number #14)
50
ms
DEC
Acceleration / deceleration time (Number #15)
30
ms
DEC
Capture - start address of data array
0
-
DEC
Capture - axis position
0
Pulse unit of capture source
DEC
Control mode: PR
Setting range: 1 - 65500
Data size: 16-bit
Control mode: PR
Setting range: 1 - 1500
Data size: 16-bit
Control mode: PR
Setting range: 1 - 1200
Data size: 16-bit
Control mode: All
Setting range: 0 to (value set by P5.010 minus 1)
Data size: 16-bit
Control mode: All
Setting range: -2147483648 to +2147483647
Data size: 32-bit
ASDA-A3
Address: 0542H
0543H
Address: 0544H
0545H
Address: 0546H
0547H
Address: 0548H
0549H
Address: 054AH
054BH