System Connection; Connecting To Peripheral Devices - Delta ASDA-A3 Series User Manual

ASDA-A3

3.1 System connection

3.1.1 Connecting to peripheral devices (connecting to Delta
communication type of servo motor)
Power
100 W - 1.5 kW Single-/Three-phase 200 - 230V
2 kW - 3 kW Three-phase 200 - 230V
No fuse breaker (NFB)
It could prevent the instantaneous excessive current caused by
short circuit or from damaging the servo drive when power is on / off.
Magnetic contactor (MC)
When an alarm occurs,
it outputs ALARM signal
and disconnect the power
of the servo drive.
Power input of the main circuit (RST)
Mini USB connector (CN4)
Connect to PC to operate the
software. Use standard type
USB mini connection cable to
connect to ASDA-SOFT.
RS-485 / CANopen
connector (CN3)
I/O Connector (CN1)
STO (Safe Torque Off)
Safe torque switch
Power input of the control circuit (L
Short-circuit P1 and P2.
Expansion module (CN9)
Reserved.
Wiring
3
ϴ
P1 P2 )
L
1C 2C
3-3