Delta ASDA-A3 Series User Manual page 389

Parameters
P0.020
Default:
Unit:
8
Format:
Settings:
Refer to Table 8.3 for the available values.
P0.021
Default:
Unit:
Format:
Settings:
Refer to Table 8.3 for the available values.
P0.022 -
P0.024
P0.025■
Default:
Unit:
Format:
Settings:
You can continuously read and write parameters faster if they are not in the same group. Use P0.035 to
specify the mapping parameter number with the panel or communication. The value of the parameter that
is specified by P0.035 is shown in P0.025. Refer to P0.035 for its settings.
P0.026■
Default:
Unit:
Format:
Settings:
This setting is the same as P0.025, except its mapping target is set in P0.036.
8-16
Select content displayed by status monitoring register 4
0
-
DEC
Select content displayed by status monitoring register 5
0
-
DEC
Reserved
Mapping parameter #1
-
-
HEX
Mapping parameter #2
-
-
HEX
Control mode: All
Setting range: 0 - 127
Data size: 16-bit
Control mode: All
Setting range: 0 - 127
Data size: 16-bit
Control mode: All
Determined by the corresponding
Setting range:
parameter P0.035
Data size: 32-bit
Control mode: All
Setting range: Determined by the corresponding
parameter P0.036
Data size: 32-bit
ASDA-A3
Address: 0028H
0029H
Address: 002AH
002BH
Address: 0032H
0033H
Address: 0034H
0035H