Table of Contents
Advertisement
Specifications
A
Note:
1.
Within the rated load, the speed ratio is: the minimum speed (smooth operation) / rated speed.
2.
Within the rated speed, the speed calibration ratio is: (rotational speed with no load - rotational speed
with full load) / rated speed.
3.
TN system: the neutral point of the power system connects directly to the ground. The exposed metal
components connect to the ground through the protective ground conductor.
4.
Use a single-phase three-wire power system for the single-phase power model.
A-4
100 W 200 W
ASDA-A3
01
Installation site
Altitude
Atmospheric pressure
Operating
temperature
(If operating temperature is above 45˚C, forced cooling is required)
Storage temperature
Humidity
Vibrating
9.80665 m/s
IP rating
Power system
Approvals
400 W
750 W
1 kW
02
04
07
Indoors (avoid direct sunlight), no corrosive vapor
(avoid fumes, flammable gases, and dust)
Altitude 1000 m or lower above sea level
86 kPa - 106 kPa
0˚C to 55˚C
-20˚C to 65˚C
Under 0 - 90% RH (non-condensing)
2
(1 G) less than 20 Hz, 5.88 m/s
IP20
TN system
IEC/EN 61800-5-1, UL 508C
1.5 kW
2 kW
10
15
20
2
(0.6 G) 20 to 50 Hz
*3*4
ASDA-A3
3 kW
30
Advertisement
Table of Contents
Troubleshooting
