Delta ASDA-A3 Series User Manual page 579

Parameters
Settings:
0: not connected to a motor temperature sensor
1: Delta linear motor NTC thermistor
8
2: PTC level thermistor
3: NTC level thermistor
Note: the connection method for the CN5 temperature sensor is to connect the two pins of the temperature sensor to
Pin 13 and Pin 14 (see Section 3.7).
PM.023
PM.024▲
Default:
Unit:
Format:
Settings:
This parameter is only valid when PM.022 is set to 2 or 3. Input the resistance value corresponding to the
temperature according to the specifications of the connected temperature sensor. Refer to the NTC or
PTC temperature and resistance value corresponding table for the resistance value.
PM.025 -
PM.027
PM.028▲●
Default:
Unit:
Format:
Settings:
Input the correct information according to the specifications of the third-party permanent-magnet rotary
motor.
Note: pole number = pole pair x 2
8-206
Reserved
Motor temperature sensor resistance
50000
ohm
DEC
Reserved
Permanent-magnet rotary motor pole number
10
pole
DEC
Applicable motor: Linear motor, third-party rotary motor
Setting range: 0 - 50000
Data size: 32-bit
Applicable motor: Permanent-magnet rotary motor
Setting range: 2 - 100
Data size: 16-bit
ASDA-A3
Address: FD30H
FD31H
Address: FD38H
FD39H