Delta ASDA-A3 Series User Manual page 34

ASDA-A3
Operation
 AC servo motor operation is controlled by the servo drive. Do not directly connect a
commercial type power supply (100/200V, 50/60 Hz) to the servo motor circuit; otherwise
the motor cannot operate normally and may be permanently damaged.
 Follow the motor specifications when using the product. The motor's operation temperature
must not exceed the specified range.
 The material of the motor shaft is not rustproof. To ensure a longer motor life, apply
rustproof oil during operation.
 The built-in brake is for clamping rather than stopping the motor. Caution: the built-in brake
is not a device for safely stopping the machine. Please install another safety device for
stopping the machine. When the built-in brake is clamping the motor, rotation backlash can
still occur and the maximum rotation is 1° to 2°. When a motor with a brake is operating, the
brake lining sometimes generates a noise (a swishing or clicking sound), which is caused
by the structure of brake module, not a malfunction. It will not affect the motor's function.
 When using a servo motor with a brake, do not use the brake for dynamic braking.
 If any odor, noise, smoke, heat, or abnormal vibration occurs during motor operation,
stop the motor and turn off the power immediately.
Others
 Delta servo motors have no user-replaceable parts.
 Do not disassemble the motor or change its parts, or it will void the warranty.
 Do not disassemble the motor by yourself, or it may lead to permanent malfunction or
damage.
 Do not splash any water or oil on the product.
Installation
2
2-7