Delta ASDA-A3 Series User Manual page 426

ASDA-A3
P1.052
Determined by the model.
Default:
Refer to the following table.
Unit: Ohm
Format: DEC
Settings:
Model
1.5 kW or below
Refer to the instructions for P1.053 for the setting to use when connecting the regenerative resistor
through a different method.
Note: setting range for 220V
Model
400 W or below
750 W - 1.5 kW
P1.053
Determined by the model.
Default:
Refer to the following table.
Unit: Watt
Format: DEC
Settings:
Model
200 W or below
400 W - 1.5 kW
Setting the parameter value when connecting the regenerative resistor with different methods:
Regenerative resistor value
Default (Ω)
100
Setting range
20 - 750
20 - 750
Regenerative resistor capacity
Default (Watt)
0
40
External regenerative resistor
Exte rnal rege nerative
resistor (para llel)
P3
1kW, 10Ω 1kW, 10Ω
C
Control mode: All
Setting range: Refer to the following note.
Data size: 16-bit
Model
2 - 3 kW (included)
Model
2 - 3 kW
-
Control mode: All
Setting range: 0 - 6000
Data size: 16-bit
Model
2 - 3 kW (included)
-
Setting
Setting:
P1.052 = 10 (Ω)
P1.053 = 1000 (W)
Setting:
P1.052 = 20 (Ω)
P1.053 = 2000 (W)
Setting:
P1.052 = 5 (Ω)
P1.053 = 2000 (W)
Parameters
Address: 0168H
0169H
Default (Ω)
20
Setting range
10 - 750
-
Address: 016AH
016BH
Default (Watt)
80
-
8
8-53