Status Display; Data Save Status; Decimal Points - Delta ASDA-B3 Series User Manual

Test Operation and Panel Display

4.3 Status display

4.3.1 Data save status

When you complete the parameter setting, press the SET key to save the parameters.
4
The panel displays the symbol of the corresponding status for one second.
Displayed symbol

4.3.2 Decimal points

4-6
Correctly saved the setting value (Saved).
Read-only and write-protected parameter (Read-only).
Entered the wrong password or did not enter a password (Locked).
Entered an incorrect setting value or the reserved setting value (Out of Range).
You cannot enter a value when the servo is in the Servo On state (Servo On).
Changes to the parameter take effect after power cycling of the servo drive
(Power On).
Displayed symbol
Description
Description
High word / low word indication: this indicates the current high
word or low word when the data is displayed in decimal format
(32 bits).
Negative sign: the two decimal points on the left represent the
negative sign when the data is displayed in decimal format
(16 or 32 bits). In hexadecimal format, it only shows positive
values.
ASDA-B3