Delta ASDA-A3 Series User Manual page 372

ASDA-A3
PR#53
PR#43
PR#44
PR#45
PR#46
Rising-edge triggers Event 3 to trigger the jump procedure to jump to PR#43.
Writes the deviation between the position before the alarm occurrence and the
current position to PR#46. Sets to inhibit the reverse operation.
Sets the allowable forward rate to 0%.
Executes Macro #D to calculate the deviation between the position before the
alarm occurrence and the current position.
Uses the incremental position command to move the cutter back to the position
before the alarm occurrence.
Motion Control
7
7-175