Status Display; Save Setting Display; Decimal Point; Alarm Message - Delta ASD-A2-0121 Series User Manual

Chapter 4 Panel Display and Operation
4.3

Status Display

4.3.1 Save Setting Display

When finishing editing parameter, press the SET key to save the setting. The panel will display the
setting status according to the setting for a second.
Displayed Symbol
The setting value is saved correctly. (Saved)
Read-only parameter. Write-protected. (Read-Only)
Enter the wrong password or no password has been entered. (Locked)
Incorrect setting value or enter the reserved setting value. (Out of Range)
No entering is allowed when it is Servo ON. (Servo On)
Parameter will be effective after the servo drive is re-powered on. (Power On)

4.3.2 Decimal Point

Display Symbol
High byte / low byte indication: When the data is displayed in decimal 32 bits,
Negative sign: When the data is displayed in decimal format, the two

4.3.3 Alarm Message

Displayed Symbol
When there is an error of the drive, it will show 'AL' as the alarm sign and 'nnn'
as the alarm code. For further explanation, please refer to Chapter 8, P0-01,
parameter description, or Chapter 10, Troubleshooting.
Description
Description
it is for indicating the current high or low byte.
decimal points in the left represent the negative sign, no
matter it is showed in 16 or 32 bits. When it is showed in
hexadecimal format, it only shows positive sign.
Description
ASDA-A2
4-5