Backup Interfaces; Wan Ethernet Port Commands - Avaya G350 Administration

Configuring Ethernet ports
Configuring the WAN Ethernet port

Backup interfaces

You can configure backup relations between a pair of any Layer 2 serial interfaces, including the Fast
Ethernet interface. For instructions on how to configure backup interfaces, see
page 80.

WAN Ethernet port commands

Use the following commands in FastEthernet 10/2 context for basic Ethernet configuration of the WAN
Ethernet port:
•
Use the
external FastEthernet port. Use the
mode.
•
Use the
•
Use the
the form of this command to restore the administrative status of the interface to up.
no
•
Use the
60
command to set the port speed and duplex to auto-negotiation mode for the
autoneg
command to control the duplex setting for the interface.
duplex
command to set the administrative status of the current interface to down. Use
shutdown
command to set the port speed.
speed
form of this command to disable the auto-negotiation
no
Administration of the Avaya G350 Media Gateway
Backup interfaces on
June 2004