Configuring Network Interfaces - Avaya S8500 Manual

Configuring the Remote Supervisor Adapter

Configuring network interfaces

1
Under ASM Control, click Network Interfaces.
The system displays the Ethernet window.
.
2
In the
DHCP
3
If you are not using DHCP, then under the Static IP Configuration heading, verify that the
IP address
If you are using DHCP, continue to the next step.
4
In the
Hostname
5
Scroll down to the bottom of the window and click Save.
To see the IP configuration settings, click IP Configuration Assigned by DHCP Server.
70
NOTE:
The Ethernet Interface is set to Enabled via the Avaya defaults. The
, and
Gateway address Subnet Mask
when you configure the Ethernet ports on the Avaya S8500 Media Server.
field, select Disabled - Use static IP configuration.
, Subnet mask , and Gateway address
field, type in the IP hostname of the RSA.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
fields are set using the Maintenance Web Interface
fields are correct.
Static IP Address ,
Static
December 2003