Backup Interface Configuration; Viewing The Backup Interfaces Table - Avaya P330 User Manual

Chapter 7
If more than one DLCI is configured on the USP, the priorities must be
distributed among the DLCIs, and no priority can be configured for
multiple DLCIs. For example, if there are three DLCIs configured for a
USP, the first DLCI may be configured with Primary and High priority,
the second with Medium and Normal, and the third with Low.

Backup Interface Configuration

The Backup interface feature enables you to configure Backup interfaces
for WAN interfaces. The Backup interface feature includes a table for
viewing all configured Backup interfaces and a wizard for creating Backup
interfaces.

Viewing the Backup Interfaces Table

The Backup Interfaces table provides a list of all configured Backup
interfaces on an X330WAN expansion module.
To view the Backup Interfaces table, select
Interfaces
The Backup Interfaces table provides information about the Backup
interfaces configured on the device.
To configure a new Backup interface, click
Wizard opens. For information on the Backup Interface Wizard, refer to
“The Backup Interface Wizard” on page 118
117
. The Backup Interfaces table opens.
Figure 7-21. Backup Interfaces Table
Configure > WAN > Backup
. The Backup Interface
Wizard
.
Avaya P330 Manager User Guide