Ras Udp Port Configuration - Avaya G150 Installation And Configuration Manual

Configuring the G150 Media Gateway with Manager
The first entry is the Primary Gatekeeper and MUST match the IP address of the
Communication Manager that G150 is connected to.
- For an S8300 Media Server, this IP address is located within the node names |
procr | ip address field.
- For an S8500/S8700 Media Server, this IP address is located within the
Communication Manager configuration in the node names | CLANx | ip address
field.
4. When all Gatekeeper IP addresses are entered, click OK.
5. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.
If updates of the manually entered Gatekeepers are required, the Manager application must be
used. If the Alternate Gatekeeper List is updated, the G150 must be restarted for the updated
list to be captured.

RAS UDP Port Configuration

The RAS UDP Port field contains the UDP port used for RAS protocol exchanges with a
Communication Manager. Because the port number is consistent for most RAS protocol
exchanges with Communication Manager, the default entry of 1719 should be accepted.
To view/update the RAS UDP Port setting:
1. Click
displaying the IP address of the G150. Enter the G150 system password.
2. Click System from the Configuration Tree and double click the G150 configuration on the
right hand side of the display window.
3. Click the SO Gateway tab.
4. The entry of 1719 should be displayed in the RAS UDP Port field, unless otherwise
specified.
5. Click OK.
6. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.
102 Installation and Configuration of the G150 Media Gateway
to receive a configuration form. The Receiving config from dialog box appears
Save. In the Sending
Save. In the Sending