Graceful-Restart T3 - Dell C9000 Series Reference Manual

graceful-restart t3

Configure the overall wait time before graceful restart completes.
C9000 Series
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency
manual
Defaults manual, 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
Usage Information The running router sets the remaining time value to the current adjacency hold time.
You can override this setting by implementing this command.
Enter the keyword adjacency so that the restarting router
receives the remaining time value from its peer and adjusts its T3
value so if you have configured this option.
Enter the keyword manual to specify a time value that the
restarting router uses. The range is from 50 to 120 seconds. The
default is 30 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Intermediate System to Intermediate System (IS-IS) 1069