Graceful-Restart T3 - Dell Force10 S4810P Reference Manual

Version 8.3.1.0

graceful-restart t3

Configure the overall wait time before graceful restart completes.
E-Series, S4810
Syntax graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency
manual
Defaults manual, 30 seconds
Command Modes ROUTER ISIS
Command History
Version 8.3.12.0
Version 8.3.1.0
Usage
The running router sets the remaining time value to the current adjacency hold time. You can
Information
override this setting by implementing this command.
Override the default restart-wait time by entering the no graceful-restart
restart-wait command. When you disable restart-wait, the current adjacency hold
time is used.
Set the t3 timer to adjacency on the restarting router when implementing this command. The
restarting router gets the remaining time value from its peer and adjusts its T3 value so only
when you have configured graceful-restart t3 adjacency.
Related graceful-restart restart-wait
Commands restarting peer comes up.
Introduced on the E-Series.
Enter the keyword adjacency so that the restarting router receives
the remaining time value from its peer and adjusts its T3 value so if
you have configured this option.
Enter the keyword manual to specify a time value that the restarting
router uses. The range is 50 to 120 seconds. The default is 30
seconds.
Introduced on the S4810.
Introduced on the E-Series.
– enables the graceful restart maximum wait time before a
983