Display Rmon Event - H3C SR6600 Command Reference Manual

Table 29 Command output
Field
AlarmEntry entry-number owned by owner is
status
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Related commands
rmon alarm

display rmon event

Use display rmon event to display the configuration of the specified or all RMON event entries.
Syntax
display rmon event [ entry-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Description
Status of the alarm entry entry-number created by the owner is
status.
•
entry-number—Alarm entry, corresponding to the MIB
node alarmIndex.
•
owner—Entry owner, corresponding to the MIB node
alarmOwner.
•
status—Entry status, corresponding to the MIB node
alarmStatus.
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The display rmon command can display invalid entries, but
the display current-configuration and display this commands
do not display their settings.
Sampling type (the value can be absolute or delta),
corresponding to the MIB node alarmSampleType.
Alarm variable, namely, the monitored MIB node,
corresponding to the MIB node alarmVariable.
Sampling interval, in seconds, corresponding to the MIB node
alarmInterval.
Alarm rising threshold, corresponding to the MIB node
alarmRisingThreshold.
When the sampling value is greater than or equal to this
threshold, a rising alarm is triggered.
Alarm falling threshold, corresponding to the MIB node
alarmFallingThreshold.
When the sampling value is smaller than or equal to this
threshold, a falling alarm is triggered.
How an alarm can be triggered, corresponding to the MIB
node alarmStartupAlarm.
Last sampled value, corresponding to the MIB node
alarmValue.
133