Display Rmon Event - H3C S5120-SI Series Command Reference Manual

Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value

display rmon event

Syntax
display rmon event [ entry-number ]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number: Index of an RMON event entry, in the range 1 to 65535. If no entry is specified, the
configuration of all event entries is displayed.
Description
Use the display rmon event command to display the configuration of the specified or all RMON event
entries.
Field Description
owner: Owner of the entry, corresponding to the MIB
node alarmOwner.
Status: Status of the entry identified by the index
(VALID means
UNDERCREATION means invalid. You can use the
display rmon command to view the invalid entry,
while with the display current-configuration and
display this commands you cannot view the
corresponding rmon commands.), corresponding to
the MIB node alarmStatus.
The sampling type (the value can be absolute or delta),
corresponding to the MIB node alarmSampleType.
Alarm variable, namely, the monitored MIB node,
corresponding to the MIB node alarmVariable.
Sampling interval, in seconds, corresponding to the MIB
node alarmInterval.
Alarm rising threshold (When the sampling value is
bigger than or equal to this threshold, a rising alarm is
triggered.), corresponding to the MIB node
alarmRisingThreshold.
Alarm falling threshold (When the sampling value is
smaller than or equal to this threshold, a falling alarm is
triggered.), corresponding to the MIB node
alarmFallingThreshold.
How an alarm can be triggered, corresponding to the
MIB node alarmStartupAlarm.
The last sampled value, corresponding to the MIB node
alarmValue.
1-2
the entry is valid, and